Adult Diaper Wholesale and Manufacturer
based in China

Want to wholesale adult diaper onboard? This ultimate solution guide would help you everything
about wholesaling adult diapers.

To Save Time, download this page as a PDF

To save you time, we have also prepared a PDF version containing all the contents of this page, only leave your message and you will get the download link immediately.



We are a company that values customers’ satisfaction. We always aim at producing and delivering quality disposable Adult diaper that meet all your needs.

With 13 years of experience, AGREE is well versed in this field. Yes, you are dealing with the masters. You can trust them with your needs and expectations.

Need proof? Why don’t you contact us and we can schedule a zoom inspection session for you. We don’t allow physical inspection at the moment because of the COVID-19 pandemic. However, this activity will resume as soon as the pandemic is over3

Factory Video

Play Video

Hot products according to our clients feedback

There are several different types of disposable adult diaper:


Adult Diapers! No more worrying about leaks and messes. Our adult diapers are designed for bigger sizes, with higher absorbency to keep you comfortable and dry all day long.  

Two tapes each side design makes sure that the diaper stays in place.

Fluff pulp+SAP made of a core like mattress will keep you cool and dry throughout your entire night’s sleep.

Breathable is designed so that when it becomes wet during use, the liquid evaporates quickly allowing air flow through. 

Super Absorbent: Our adult diapers are perfect for those who need high absorbency protection with a super-absorbent material that will keep you feeling comfortable and dry all day long.

How we test the absorbent of adult diaper?

There are several methods used to control the quality of disposable diapers, and most of these relate to the product’s absorbency. One key is to make sure the polymer/fiber ratio in the absorbent pad is correct. Too much variation will impact the diaper’s ability to soak up moisture. Industry trial and error has shown that for optimal performance and cost, the fiber to particle ratio should be about 75:25 to 90:10. Even more critical than this ratio are the size and distribution of these particles. It has been established that particles with mass median particle size greater than or equal to about 400 microns work very well with the fibers to enhance the rate at which the fluid is transported away from the body. If the particles vary much outside this range, gel blocking may occur.

Other quality control factors besides absorbency are related to the diaper’s fit and comfort. Particular attention must be paid to the melt characteristics of the nonwoven fabrics used to form the diaper’s shell. If materials with different melting points are used, the material that melts the quickest may become too soft and stick to the assembly apparatus. When the fabric is pulled off it may be left with a rough surface that is uncomfortable to the user. Finally, the alignment of the components must be carefully checked or leakage may result.

Contact AGREE to Start Your Business

Our story begins here, just put your message below, let us talk:

Testimonial (what they said?)

Have a look at how some of our clients perceive our goods and services:

Play Video

Estimated wholesale price

All the money paid to AGREE for the purchase of their products is secure. With us,  your business in safe! Your money in safe! Below is an outline of costs you will incur:

Design Fee

 We usually offer free once buyer confirmation their specification

Mould Fee

This is the amount of money that you will pay for your private label mold cost, included the design of the bag, the product’s design

Sampling fee

We don’t charge for sample’s fee of our regular products, but if you need a specific sample as per your specification, then you need to pay accordingly

before After
Storage Fee

This cost usually for the less MOQ, since all private label is with a MOQ requirement, if not reach the MOQ, there is a storage cost

30% T/T Fee

This amount is to confirm the order, usually 30% as a deposit

70% Final Fee

Complete your payment within a certain period and receive the products you ordered for.

Estimated manufacturing and shipping times

We work fast. With the increasing number of customers approaching us, we have no other option but to prioritize speed. Let’s look at the whole process of manufacturing and shipping:

Step 1

Design & Mold making

Buyer’s private label needs time to confirm the design and make molds for print the packing bag, usually takes 7-10days for ready the bag

Step 2


Once the packing bag and other raw materials ready, will start production, it comes up with finished products, 2days can produce 1x40HQ

Step 3

Custom Declare

Will arrange to book the ship and load the container, before book, we use to confirm the shipping cost with buyer one week advance

Step 4

Sea and land transportation time

The goods will sail on the sea. The time depend on the countries port, when the goods arrived at destination port, you can prepare the custom clearance to get the container


The whole process of wholesale Adult Diaper

This is what we do when it comes to making disposable Adult Diaper:

Confirm the packing design

Your ideas might scatter on papers, napkins, or maybe just in your brain. It takes a long way to put the puzzles together and creat the design you have always dreamed of. Fortunately, you can count on AGREE along the way.

Making Mold

From the picture that comes to packing, it need make metal mold that can print the design on our packing, it usually takes 7-10days, but it only request in first time order

Color checking

After ready the mold, we should check the color when printing the bag, it can have little different as per the different raw materials of bag, such as PE, Aluminum foil bag or paper box

Prepare raw materials

Some private label takes more, such as the backsheet, release paper, individul lap that can be designed with logo or brand name, other general raw materials are prepared fast, takes 7-10days, maxium 15days in busy season

Disinfection of raw materials

All raw materials must be prepared advance for disinfection before install on the machine to start production.

Start Production

Our expert engineers will install the approved raw materials on the machine and make sure everything in the right place, then speed up the production, the finished products will completed.

What are the components of a typical disposable adult diaper ?

What are Disposable Adult Diaper products really made of? This is a commonly asked question and we want to make you sure you have the answers on what ingredients and materials are in products, so you can feel confident in the safety of our products!
Most Disposable Adult Diaper are made with the following basic components:


It is the main top sheet, the top surface that is in contact with skin.  It allows the liquids to flow into the sanitary pad core. With different surfactant treatment used in the process. More than 10 kinds of treatment avaiable for the topsheet and in different raw materials

Cellulose (fluff pulp)

Used in the construction of the pad, Cellulose comes from pine trees, generally obtained from well managed forests. Fluff is found at the center of the core, in a ratio with SAP (i.e., 50/50 or 30/70). It is typically composed of cellulose from trees and helps with rapid absorption and distribution of fluid.

Super Absorbent Polymer (SAP)

With its abbreviation SAP, It is typically used in fine granular form (like table salt). This polymer is usually combined with fluff to create the core matrix It helps improve capacity for better retention in a disposable sanitary pad, allowing the product to be thinner with improved performance and less usage of pine fluff pulp.


This is used as the back sheet that prevents the liquids from leaking out of the pad, it can be breathable and unbreathable. Also can use as wrapping film, keep the pad clean and avoid the pad gets damp.


They are used to glue the different components of the pad, such as the core and the back position adhesive(release paper). Most of the times two types of adhesives are used


It can be customized as per buyer’s logo and prefered design, the most economic is the PE packing; Aluminium foil bag which is resealable but double cost than PE bag; Some countries also like to use zipper bags; Paper boxes are generally used for environmentally friendly products such as organic cotton and bamboo sanitary napkins.

Things you Need to Know

To save you from worries, here are some facts you need to know about our wax supplies:

Do you offer free shipping for sample order ?

Unfortunately, no. You will have to pay a small fee for shipping while samples are free. You can either give us your DHL or Fedex account or send us the shipping cost by TT to our account. When you place the order, this amount will deduct from the order.

How long does it take for me to receive the goods that I've ordered?

Usually within 3 weeks if no customization of the products, for private label needs another 7-10 days for making molds, but It may take up to 60 working days if the shipping company stock in trouble.

Can you replace products that are damaged during shipping?

It happens on rare occasions because we ensure that all our products are well-packaged before being shipped.
But in case it does, please contact customer care on the website. They will guide you and advise you accordingly.

Is there an extra cost for Private label?

Yes, it did. Due to we need to do the packing as per your own design or pieces of each bag, and with your logo, it will need to make molds for printing your customized bag which needs to pay the costs about USD120/color each size, it will depend on the bag size.

What am I supposed to do if my wholesale order delays?

If your order is late for more than a week, email AGREE customer care on the website to be assisted further.
Kindly note that sometimes the orders can delay because of unavoidable circumstances. Just be patient and we will let you know if there is a valid reason for the delay.

What will be the MOQ if I want my own private label?

The MOQ will be 1x40HQ, about 70000pcs for Adult diaper, you can mixed 2 sizes into a container. It’s usually packed with 10pcs per bag, and outer packing with transparent bag, by this way, can load more quantities into the container, especially now the shipping freight very high, it’s a great saving.

Agree-A Leading Adult Diaper Exporter

Agree is the best manufacturer of adult diapers. We utilize our highly advanced machinery, modern technology, very skilled staff, and a team of specialists to produce high-quality adult diapers. You should not be concerned about the quality of our adult diapers. This is because their quality is monitored by our international quality assessment team daily. Our global quality assessment team consists of quality assessment experts from across the globe. Our state-of-the-art machinery and highly competent workforce have helped us sell adult diapers at prices lower than our rivals. Therefore, we have successfully built our reputation as a well-known adult diaper exporter in the world.

Read More

Not Satisfied With Your Existing Adult Diaper Supplier?

Contact us to start earning profits in your country today! We usually reply your message within 6 business hours.